Specifications

Step: When programmed as an Area system, a short will arm the areas and beep the keypads

once. When programmed as All/Perimeter or Home/Away, on the first short Home (Perimeter) will

arm and beep the keypads once. On the second short, Sleep will arm for Home/Away systems and

beep the keypads twice. When programmed as All/Perimeter, the interior will arm and beep the

keypads twice. On the third short, Away will arm and beep the keypads three times. A normal

condition will cause no action. An open condition will disarm the programmed areas and beep the

keypads for one second.

Note: This arming style is designed for wireless arming pendants. When using an arming/

disarming keyswitch locate the keyswitch within the protected area.

Maintain: When the zone is shorted, the programmed areas are armed. When restored to normal,

the programmed areas are disarmed and any alarm bells are silenced. When the zone is opened

from a normal (disarmed) state, a trouble is reported. If opened from a shorted (armed) state, an

alarm is reported and the zone is disabled until you disarm the area(s) from either a keypad or

Remote Link computer.

Program > Zo ne Informatio n > Standard Tab

Zone Number: Enter the number of the zone you are programming.

XR550 Series, XR500 Series, XR2500F Zone Numbers

XR350 Series Zone Numbers

XR150 Series, XR100 Series Zone Numbers

XT Series Zone Numbers

XRSuper6, XR20, XR40 Zone Numbers

XR200, XR200-485(B), XR2400F Zone Numbers

Zone Name: Assign a name to each zone in the system. Zone names may have up to 32 alphanumeric

characters. The name can display at the keypads during arming and disarming so the user does not

have to memorize zone numbers.

Type: This field designates the zone type, which defines the panel's response to the zone being

opened or shorted, or the Alarm Action.

Area: Enter the area number where you are assigning the zone. In an Area system or a Home/Sleep/

Away with Guest system, enter the area number where this zone is being assigned. Area numbers can

be assigned for Night, Day, Exit, Auxiliary 1 and Auxiliary 2 zones.