Specifications

© 2015 Digital Monitoring Products
Program > Area Informatio n
Area: Assign a number to the area you are programming.
Area Name: Assign a name up to 16 characters long for the area you are programming. Only systems
programmed for Area arming have this option available.
Note: XR150/XR350/XR550 Series and XR100/XR500 Series Version 205 or higher accept
names up to 32 character.
On an XR150/XR350/XR550 Series or XR100/XR500 Series panel configured to operate as an
All/Perimeter or Home/Sleep/Away system, the Area Number and Area Name are preassigned
and cannot be changed.
• Area 1 = Perimeter
• Area 2 = Interior
• Area 3 = Bedrooms
For XR150/XR350/XR550 Series or XR100/XR500 Series using a Home/Sleep/Away with Guest
system, the Area Number and Area Name are preassigned and cannot be changed. Areas 1, 2,
and 3 are the Perimeter, Interior, and Bedrooms for the Main house system. Areas 4, 5, and 6
are the Perimeter, Interior, and Bedrooms for the Guest 1 house system. Areas 7, 8, and 9 are
the Perimeter, Interior, and Bedrooms for the Guest 2 house system. Guest 2 feature is not
available on XR100 or XR150 Series panels.
Configure these three areas using the following options as needed.
Account Number: Enter the account number to be sent to the receiver for this area. Choose an
account number compatible with the Main Communication Type selected in Communications. The
default Account Number is the one previously entered in Communications. For XR150/XR350/XR550
Series and XR100/XR500 Series panels Version 203 or higher, this account number is used when
sending area messages and events to the central station. XR150/XR350/XR550 Series and XR100/
XR500 Series alarm systems send an area account number instead of the system account number with
the following panel messages/events based in the area assigned to the zone that initiated the alarm:
WARNING: Alarm Bell Silenced (S34)
Abort Signal Received (S45)
Cancel Signal Received (S49)
ALERT: System Recently Armed (S78)
ALERT: Exit Error (S80)
ALARM: Verify Signal Received (S96) (not currently sent on area systems)
The XR150/XR350/XR550 Series and XR100/XR500 Series has always sent the area account number for
the following messages:
Zone event messages for all non-24 hour zones assigned to an area
Arming
Disarming
The XR150/XR350/XR550 Series and XR100/XR500 Series sends the following messages using the area
account number based on the lowest area number in Display Areas programming from the keypad
being used:
User Code Add/Change/Delete