Specifications

© 2015 Digital Monitoring Products
configured to operate as an All/Perimeter or Home/Sleep/Away system, the Area Number and
Area Name are preassigned and cannot be changed.
• Area 1 = Perimeter
• Area 2 = Interior
• Area 3 = Bedrooms
For XR150/XR350/XR550 Series or XR100/XR500 Series using a Home/Sleep/Away with Guest
system, the Area Number and Area Name are preassigned and cannot be changed. Areas 1, 2,
and 3 are the Perimeter, Interior, and Bedrooms for the Main house system. Areas 4, 5, and 6
are the Perimeter, Interior, and Bedrooms for the Guest 1 house system. Areas 7, 8, and 9 are
the Perimeter, Interior, and Bedrooms for the Guest 2 house system (XR350, XR550, XR500
only).
Configure these three areas using the following options as needed.
A ccount Num ber: Enter the account number to be sent to the receiver for this area. Choose an
account number compatible with the Main Communication Type selected in Communications. The
default Account Number is the one previously entered in Communications. For XR150/XR350/XR550
Series and XR100/XR500 Series panels Version 203 or higher, this account number is used when
sending area messages and events to the central station. XR100 and XR500 alarm systems send an
area account number instead of the system account number with the following panel messages/events
based in the area assigned to the zone that initiated the alarm:
WARNING: Alarm Bell Silenced (S34)
Abort Signal Received (S45)
Cancel Signal Received (S49)
ALERT: System Recently Armed (S78)
ALERT: Exit Error (S80)
ALARM: Verify Signal Received (S96) (not currently sent on area systems)
The XR150/XR350/XR550 Series and XR100/XR500 Series has always sent the area account number for
the following messages:
Zone event messages for all non-24 hour zones assigned to an area
Arming
Disarming
The XR150/XR350/XR550 Series and XR100/XR500 Series sends the following messages using the area
account number based on the lowest area number in Display Areas programming from the keypad
being used:
User Code Add/Change/Delete
Door Access/Denied
User 1 Ambush and Early Morning Ambush
System Test Begin/End
Unauthorized Entry
Service Code and Service Request
The XR150/XR350/XR550 Series and XR100/XR500 Series sends the following messages using the area
account number based on the area number: