Specifications

© 2015 Digital Monitoring Products
To program a new area, press the New button and enter the settings for the new area into the fields in
the Area Information window.
To delete a programmed area, select the area in the list on the left side of the window and press the
Delete key.
To modify the programming for an area, select the area by clicking on the line in the list, and then
make any desired changes to the fields in the Area Information window. Click OK when you finish
making changes to the area.
Global Settings (XR150/XR350/XR550 Series and XR100/
XR500 Series):
Exit Delay : Enter the exit delay time for all Exit type zones in this area. When the exit delay time
starts, all activity on that zone and other non-24-hour zone types in the area is ignored until the exit
delay expires. The keypad displays the Exit Delay time countdown and annunciates the Exit Delay tone