Specifications

Door Open with door number

Door Closed with door number

Output On

Output Off

Output Pulse

Output Temporal

Several options are available when configuring the panel for Host/Net communication, Host backup

communication, and Host Log Reports. All options require a 462N card and an iCOM/iCOM-E Internet

Alarm Router (an iCOM/iCOM-E is not required for the Host Log Reports when a direct connection is

used).

The chart below outlines the different ways you can configure the panel for these three options. As

shown in the chart below, it is possible to use only one 462N card to meet all three of these needs. The

chart also explains when a Modem Setup String is required.

When using a direct connection to a Advanced Reporting Module computer for the Host Log Reports,

the 462N card can only be used for logging: A separate card will be needed for Host/Net

Communication and Host Backup. Also, a Modem Setup String is not required when using a direct

connection for the logger.

Refer to Communication and Host Log Reports for more information. Also refer to Host Backup

Examples.

Program > A rea Information