Specifications

Zone Reports: Prints changes in the status of active zones. Reports include the zone number, name,

and type as well as the action (alarm, trouble, bypass, etc.) user number (if applicable) and area

name.

User Command Reports: Prints user code changes, outputs turned on or off, schedule changes, and

User Menu functions.

Door Access Reports: Prints door access activity. Reports include the door number, user number

and name, and the time and date of the door access.

Supervisory Reports: Prints system monitor troubles and system events.

Customer Name: (1812 panel only.) Enter the name of account in the Customer Name field.

Program > PC / Host Log Reports

PC Log Reports menu is available on all:

Version 106 or higher: XR150/XR350/XR550 Series, XR500, XR500N, XR500E, or XR2500F, XR100,

XR100N

Host Log Reports menu is available on

Version 111 or higher: XR200 and XR2400F

Version 205 and higher: XR200-485

Version 105 and lower: XR500 Series and XR2500F

This section allows you to program the types of PC log reports the panel sends through the 462N

Network Interface Card or through the J21 Serial Connector on the XR150/XR350/XR550 Series/XR500

Series/XR2500F panel or through the J1 network connection on the XR150/XR350/XR550 Series/XR500

Series/XR2500F or XR100N panel. The reports include information such as the type of activity, time

and date of the activity, and user name and number. These data logging reports can be accessed using

the Advanced Reporting Module. See the Advanced Reporting Module User's Guide, LT-0645. See the

XR150/XR350/XR550 Series Installation Guide (LT-1233), XR500 Series Installation Guide (LT-0681)

for detailed J21 or J1 setup information or the XR100 Series Installation Guide (LT-0899) for detailed

J1 setup information.

Note: If you are using the Advanced Reporting Module with another module, such as Alarm