Specifications

Note: Output Groups 1 through 10 can be assigned to a user profile for applications such as

elevator control. See the Output Group section of the XR150/XR350/XR550 User's Guide (LT-

1278), XR500/XR100 User's Guide (LT-0683), XR2500F User's Guide (LT-0760), or XR200-

485/485B User's Guide (LT-0364), for additional information.

Note: Output groups 11 through 20 can be assigned to a profile using Remote Link. On XR200-

485(B) panels if you assign an output group higher than 10 to a profile, you must also add that

output group to the Master profile.

Assign a description or note about each output group in the field at the bottom right corner of the

Output Groups window. To enter a note or description, press the Description button to open the Edit

Rich Text window. After you type your note, go to File > Save and Exit to save your work and close the

Edit Rich Text window. Your note appears in the field above the Description button.

Program > Menu Display

Menu Display allows you to select which keypad addresses display Armed Area status, Time, and Arm/

Disarm status.

Armed Area Status Display: Enter the keypad

addresses that can display the armed areas for their

partitions. For example: if address 1 is enabled here, it

can display the armed areas within its partition.

Time Display: Enter the keypad addresses that can

display the time and day of the week.

Arm Disarm Display: Enter the keypad addresses from

which users can arm and disarm the system.

Note: Enter the sequence of addresses separated by

commas to enable door access reports; i.e. addresses 1

through 4, 6 and 10 through 16 would be entered as 1-4, 6, 10-16.

Program > Status List

This window allows you to program alarm, trouble, and status keypad displays. Each option that you

program will automatically cycle on the keypad display when the keypad is not performing any other

function.

The options in the Status List window define which keypad addresses display the various status

information. Any combination of addresses can be entered to display the status items that follow. If

you do not want a particular status item to display, do not enter any addresses in these fields.

Note: Enter the sequence of addresses separated by commas to enable door access reports;

i.e. addresses 1 through 4, 6 and 10 through 16 would be entered as 1-4,6,10-16.

System Troubles Status Monitors: Specifies the addresses where System Troubles are displayed. If

you select this option for a keypad address, the following will display at the selected keypad:

AC Power