Specifications

This section allows you to assign an output number and name to relay outputs. In addition you can

program wireless outputs into the panel when using an 1100 Series Wireless Receiver.

To program a new output, click New, and enter each field described below. When you are done, click

OK.

To delete an output name, select the corresponding line from the list and click the Delete button.

Note: Serial Number and Supervision Time options are available on XR150/XR350/XR550

Series, XR100/XR500 Series, XR2500F, XT30, XT50, XRSuper6, XR20, and XR40 panels.

Output Number: Enter the number of the output you are programming. Select from the following

output numbers:

Note: In order for wireless output troubles to display at a keypad, the keypad address must be

specified at the Auxiliary 1 Zones prompt in Status List programming.

XT30, XT50, XRSuper6, XR20, XR40

1 to 4

31 to 34 - Slow response time wireless outputs (activates within 15 seconds)

41 to 44 - Fast response time wireless outputs (activates within 1 second)

F1 to F20 - Activate Z-Wave Favorites

XTL, XTLN, XTLN-WiFi

31 to 34 - Slow response time wireless outputs (activates within 15 seconds)