Specifications

When selected, the first 16 characters of the name field are sent to the central station. If not

selected, all characters entered in the name field up to the maximum of 32 characters are sent. The

default is checked.

Note: Using 32 character names increases the length of the DMP Serial 3 message from the

panel to the receiver. The SCS-1R receiver does not require an update to pass these messages

to the Host Automation System of the Central Station. Before using names longer than 16

characters, determine whether the Host Automation System of your Central Station can accept

17 to 32 character names. If not, only use 16 character names.

Keypad Armed LED

This option is available only when using an Area system. Select ALL to require all keypad display areas

to be armed before the keypad Armed LED turns on. Select ANY to turn on the keypad Armed LED when

any keypad display area is armed. Default is ALL.

Options - XR500 Series