Specifications

© 2015 Digital Monitoring Products
Arming System: Configures the system operation for the panel. Choose the operation from the drop-
down menu:
Area: Assigns the panel as an area system. Each area needs to be named in Program >Area
Information.
- XR500 Series and XR550 Series panels support Areas 1-32
- XR350 Series panels support areas 1-16
- XR100 Series and XR150 Series panels support Areas 1-8
All/Perimeter: Assigns the panel as an All/Perimeter (perimeter and interior) system.
- Area 1 = Perimeter and Area 2 = Interior
Home/Sleep/Away: Assigns the panel as a Home/Sleep/Away (perimeter, interior, and bedrooms)
system.
- Area 1 = Perimeter, Area 2 = Interior, and Area 3 = Bedrooms
Home/Sleep/Away with Guest: This allows the alarm system to be divided into a main house
HOME/SLEEP/AWAY system and up to two other guest houses that also are set up as HOME/SLEEP/
AWAY systems.
Areas 1, 2, and 3 are the Perimeter, Interior, and Bedrooms for the Main house system. Areas 4, 5,
and 6 are the Perimeter, Interior, and Bedrooms for the Guest 1 house system. Areas 7, 8, and 9 are
the Perimeter, Interior, and Bedrooms for the Guest 2 house system. These areas are automatically
assigned per system and cannot be changed. See Display Areas in Device Setup to assign keypads to a
system. Zones are assigned to a system by assigning the system's area numbers to the zone in Zone
Information programming.
When either All/Perimeter, Home/Sleep/Away, or Home/Sleep/Away with Guest is selected, the area
names are automatically assigned and cannot be modified.
Note: Areas 3 and higher in All/Perimeter operation, Areas 4 and higher in Home/Sleep/Away
operation, and Areas 10 and higher in Home/Sleep/Away with Guest systems are not available
for use and are initialized.
Primary Programming Language: Enables keypads connected to the panel to always display panel
programming in the selected language. Available languages are English, Spanish and French. Default is
English.
Secondary Programming Language: Allows the installer the choice to view programming in English,
Spanish or French. When the programming menu is accessed, the installer is prompted to choose the
programming language. When the Secondary Programming Language is set to None, the option to
choose a language does not display. Default is None.
Primary User Language: Enables the keypads connected to the panel to always display User Menu
and Status List in the selected language. Default is English.
Secondary User Language: Allows the user the choice to view User Menu and Status List in English,
Spanish, or French. When the User Menu is accessed, the user is prompted to choose the language.
Status list continues to display in the last language selected until another language is selected. When
the Secondary Programming Language is set to None, the option to choose a language does not
display. Default is None.
For example, selecting Spanish at a keypad displays the User Menu and Status List in Spanish at that
keypad. When the user later accesses the keypad, pressing the COMMAND key once displays the multi-
lingual option. If English is selected at that keypad, the User Menu and Status List change to English
until another language is selected.