Specifications

© 2015 Digital Monitoring Products
Note: Complete all panel programming before activating the cellular path to ensure the correct
rate plan is calculated for usage.
SIM Type: Select the type of SIM card you are activating. Select either 200, 400, or MEID.
SIM/MEID Card#: Enter the SIM (Subscriber Identity Module) or MEID (Mobile Equipment Identifier)
number from the SecureCom AT&T Wireless SIM card, SecureCom T-Mobile Wireless SIM card, or the
263C/463C CDMA Cellular Communicator. The MEID number can be found on the label of the 263C or
463C.
Rate Plan: For XT Series, XTL, XR100, XR500 Series, and XR150/XR350/XR550 Series panels,
Remote Link automatically populates this field with a suggested rate plan that most closely matches
the communication path programming for the panel. If you choose to override the suggested rate plan,
you could experience overage fees from SecureCom Wireless, LLC.
Using Model 380-200 SIM Card
SIM Card
Data Included
Plan 203: Back-up alarm signal only
Level 200
0kb
Plan 205: Back-up or primary alarm signal only, provides for weekly
test
Level 200
50kb
Using Model 380-400 or 380-400T SIM Card
SIM Card
Data Included
Plan 406: Back-up or primary path with a daily test
Level 400
50kb
Plan 408: Primary path with hourly check-in and O/C reports for up
to 4 areas.
Level 400
200kb
Plan 410: Primary path with an hourly test and O/C reports for up to
8 areas.
Level 400
300kb