Specifications

Entré Backup TCP Port: This option displays only if NET is chosen for the Entré connection. Enter the

backup port number for the outbound Entré connection in case the connection to the primary IP fails.

Default is 2001.

Entré Checkin: Select the rate at which check-in messages are sent over the Entré connection. Select

0 (zero) to disable check in messages. Range is 0, 3-240 minutes. Default is 0.

Entré Passphrase: To enable encryption enter an 8 to 16-character Passphrase using alphanumeric

characters. If you leave the Passphrase blank, the panel communicates with Entré, but the data is not

encrypted. The Passphrase is blank by default.

Program Sync Options

Send Local Changes (XR150/XR350/XR550 Series and XR100/XR500 Series Version 204 or

higher): This option allows the panel to automatically update a remote programming computer at the

central station with any changes made to the panel. Select NET or DD to send local programming

changes or User Menu changes to user codes, user profiles, schedules, or holiday dates to Remote Link

after exiting the programming or User Menu. If NET is selected, changes are sent using Network. If DD

is selected, changes are sent using Dialer. Select None to disable this feature. Default is None.

Remote Change IP (XR150/XR350/XR550 Series and XR100/XR500 Series Version 204 or

higher): This option displays when NET is selected for Send Local Changes. The Remote Change IP

Address must be unique and cannot be duplicated on the network. Default is 000.000.000.000

Note: When entering an IP address do not enter leading zeros.

Remote Change Port (XR150/XR350/XR550 Series and XR100/XR500 Series Version 204 or

higher): This option displays when NET is selected for Send Local Changes. Enter the Port number.

Valid numbers are from 1 to 65535. Default is 2002.

Remote Phone Number (XR150/XR350/XR550 Series and XR100/XR500 Series Version 204

or higher): This option displays when DD is selected for Send Local Changes. Enter the phone number

the panel dials when sending programming changes. After entering a phone number, the panel sends

any panel changes to the Remote Link programming computer.

The phone number can have two lines of 16 characters each to equal 32. Enter a P to program a two

second pause in the dialing sequence. The P character counts as part of the 32 allowable characters.

Enter *70P as the string first characters to cancel call waiting. No dial tone detect "D" is required. Dial

tone detect is an automatic panel function.

App Key (XR150/XR350/XR550 Series): Enter the 8-digit App Key obtained in your Dealer Settings

tab at vk.securecomwireless. com. This option is a security feature of the Virtual Keypad iPhone/

Android App used only when your Dealer Settings at vk.securecomwireless.com have “persistent” set

as the Communication Type. This communication option is only available for panels with onboard

network and is used to eliminate the need for a static IP address programmed in Network Options. To

enter a new App Key, press any Select key and enter any combination of 8 digits. Press COMMAND.

The default for this option is blank.