Specifications

automatically turn off when all access areas assigned to the device arm, even if the scheduled off time

has not been reached.

You may use the Override feature to keep doors locked when a business opens late, or is forced to

close early, due to a snowstorm or other cause. Leave the Override field blank to allow door schedules

to operate independent of system armed status.

Auto Force Arm (XR150/XR350/XR550 Series and XR100/XR500 Series): Enable to have all

Display Areas assigned to this keypad automatically arm and to force arm faulted zones at arming. If

Closing Code is programmed as YES, only the matching areas between the Display Areas and the User

Code's authorized areas arm. Also, when enabled, the user is not prompted to select areas to disarm

after entering a code at Entry Delay or after choosing Disarm at the keypad. All matching areas

assigned to the User Code and to this keypad are automatically disarmed. When not enabled, the user

is prompted to select areas (ALL NO YES) and choose to force arm or bypass at arming and

disarming. See the Device Setup section of the XR500 Series Programming Guide (LT-0679),the XR100

Series Programming Guide (LT-0896), or the XR150/XR350/XR550 Series Programming Guide (LT-

1232).

Door Real-Time Status: Enable to have real-time door status messages sent to PC Log reporting and

Entré reporting for this device. Messages are sent anytime the panel turns the door relay on or off.

Default is disabled.

Send Door Forced Message: Enable to have the panel send a real-time door status message of

Forced Open (FO) to PC Log reporting and Entré reporting when the door relay is off, but the door zone

has transitioned from its normal state. Default is disabled.

Public Door: Enable to program the device as a public door. Any door programmed as a public door

will remotely lock when the Lockdown button is activated in Panel>System Status. The Lockdown

feature can be used in emergency situations where it is necessary to restrict the site's access to

authorized users only. See Lockdown for more information.