Specifications

© 2015 Digital Monitoring Products
Note: Mail servers that require encryption are not supported by the panels.
Note: Email messaging is not supported in XR150/XR350/XR550 Series panels.
Destination 1 (XTLN, XTLN-WiFi): Enter the first destination email address where messages will be
sent. The message can be sent to any device (computer, cell phone, PDA) as long as a valid email
address is entered.
Dest 1 User Num (XT30, XT50, XTL, XR100, XR500, and XR150/XR350/XR550 Series): For XT
Series Version 102 or higher, XTL, XR100/XR500 Series Version 205 or higher, and XR150/XR350/
XR550 Series. If Destination 1 is a 10-digit cellular number, you may enter a user number from this
account. This option is used when sending commands such as arming or disarming back to the panel
using MyAccess text commands from the same cell phone or PDA. The user number must have the
authority to perform the commands as if it occurred at the keypad. MyAccess text commands are
available in XT30/XT50 Series panels using version 102 or higher, XTL panels, XR100/XR500 Series
panels using version 205 or higher, and XR150/XR350/XR550 Series. Entering 0 (zero) disables this
option. Default is 0.
Destination 2 (XT30, XT50, XTL, XR100, XR500, and XR150/XR350/XR550 Series): Enter the
second destination email address or cell phone number for messages.
Destination 2 (XTLN, XTLN-WiFi): Enter the second destination email address for messages.
Dest 2 User Num (XT30, XT50, XTL, XR100, XR500, and XR150/XR350/XR550 Series): For XT
Series Version 102 or higher, XTL, XR100/XR500 Series Version 205 or higher, and XR150/XR350/
XR550 Series. If Destination 2 is a cellular number, enter the User Number.
Destination 3 (XT30, XT50, XTL, XR100, and XR500): Enter the third destination email address or
cell phone number for messages.
Destination 3 (XTLN, XTLN-WiFi): Enter the third destination email address for messages.
Dest 3 User Num (XT30, XT50, XTL, XR100, XR500, and XR150/XR350/XR550 Series): For XT
Series Version 102 or higher, XTL, XR100/XR500 Series Version 205 or higher, and XR150/XR350/
XR550 Series. If Destination 3 is a cellular number, enter the User Number.
Options
Email Communication Type (XR100/XR500 Series Version 203 or higher, and XT Series panels
only): Choose NET to send email messages over the network. Choose CELL to send email messages
using cellular communication. Default is NET. This prompt displays if Enable Messaging is selected.
Email O/C (XR100/XR500 Series Version 203 or higher, XT Series, XTL, XTLN, and XTLN-WiFi
panels only): Select to allow the panel to send Opening and Closing reports via email. Default is NO.
This prompt displays if Enable Messaging is selected.
SMS O/C (XR150/XR350/XR550 Series, XR100/XR500 Series Version 203 or higher, XT
Series, and XTL panels only): Select to allow the panel to send Opening and Closing messages to a
cell phone via SMS protocol. Default is NO. This prompt displays if any destination is a cell phone
number.
Monthly Limit (XTL, XT30/XT50 Series Version 106 or higher, XR100/XR500 Series Version