Specifications

© 2015 Digital Monitoring Products
Note: IP addresses and port numbers may need to be assigned by the network administrator.
When entering an IP, Gateway, or Subnet Mask address be sure to enter the periods and do
not enter leading zeros. For example, IP address 192.168.000.125 is entered as
192.168.0.125.
DHCP Enabled: Enable if the panel has a dynamic IP address. If the panel has a static IP address, do
not select DHCP Mode.
Local IP: Enter the IP address assigned to the panel. The Local IP Address must be unique and cannot
be duplicated. The default Local IP is 192.168.000.250.
Gateway: Enter the gateway address assigned to the panel. The Gateway IP Address is needed to exit
your local network.
Subnet Mask: Enter the local subnet mask assigned to the panel.
DNS Server: Enter the IP address of the DNS (Domain Name System) used by the panel to resolve
domain names into IP addresses. The default address is 0.0.0.0.
Programming Port (XR150/XR350/XR550 Series, XR100/XR500 Version 205 or earlier, XT30,
XT50, XTLN, and XTLN-WiFi): Enter the network port to be used for programming the panel. The
default value is 2001.
Note: The Local IP and Programming Port need to match the IP Address and IP Port entered in
the Panel Information window. If a router is connected to the panel, the ports must be opened
in the router.