Specifications

Program>Communication P aths

Paths

Account Number: The Account Number is a 1 to 5 digit number used to identify which panel is

sending a message. Enter the account number sent to the SCS-1R Receiver. Messages may be sent to

a central station or via PC Log Reports to a PC. The default is 12345.

NET, CELL, 232 and DD - The range of valid account numbers for a panel is 1 to 65535. For

accounts of four digits or less, do not enter leading zeros.

CID - Choose an account number between 1 and 9999.

Transmit Delay: Enter the length of time that the panel should wait before sending burglary reports

to the central station. Select a time from 1 to 60 seconds. Alarm bells and relay outputs are not

delayed during this period. Enter 0 (zero) to disable transmission delay.

Path: Up to eight communication paths may be programmed. Each path is designated as a primary or

backup communication route. Path 1 is always Primary but other paths may be programmed as

additional primary or backup.

Each primary path establishes a new path group. A path group is made up of the primary path and its