Specifications

© 2015 Digital Monitoring Products
Program > Comm unicatio ns > Host Tab
The fields explained below are
available for the iCOMsl. If
you need information on the
available host features for a
different panel or version,
see Host/Net Tab.
DHCP Mode: Enable if the
iCOMsl has a dynamic IP
address. If the iCOMsl has a
static IP address, do not
select DHCP Mode.
Note: When entering
an IP address be sure
to enter the periods
and it is not
necessary to enter
leading zeros. For
example, IP address
192.168.000.125 can
be entered as 192.168.0.125.
Local IP: Enter the IP address assigned to the iCOMsl.
Local Port: Enter the UDP port assigned to the iCOMsl. The default value is 2001. If you must
change this value, enter the new port number from 1 to 65535.
Programming Port: Enter the TCP port to be used for programming the iCOMsl. The default value is
9999.
Note: The Local IP and Programming Port should match the IP Address and IP Port entered in
the Panel Information window.
Receiver IP: Enter the IP address to which the panel will transmit alarm messages.
Receiver Port: Enter the UDP port the iCOMsl will use to transmit alarm messages. The default value
is 2001.
Subnet Mask: Enter the local subnet mask assigned to the iCOMsl.
Gateway: Enter the gateway address assigned to the iCOMsl.
Retry Time: Enter a time between 3 and 15 seconds for the iCOMsl to wait before retrying a failed
communication attempt with the central station. The default is 5 seconds.
Substitution Code Enable: Enable to have the iCOMsl send a substitution code when communicating
with the receiver. The iCOMsl Substitution Code increases the level of security by helping to ensure
the message being sent to the receiver has not been substituted.
Check-in Time: Enter a number between 0 to 240 program the number of minutes between check-in
messages the iCOMsl sends to the receiver. Enter 0 (zero) to program the iCOMsl to never send a
check-in message. The default is 1 (one).
Fail Time: Enter a number between 0 to 241 program the number of minutes the receiver allows to