Manualshelf

Specifications

ManualsBrandsDMP Electronics ManualsHome building and DecorXR500 SERIES
141142143144145146147148149150
© 2015 Digital Monitoring Products
XT30/XT50 Series (Versio n 103 or higher), XTL, X TLN, and XTLN-WiFi
panels
First GPRS APN (XT30, XT50, and XTL): Enter the first APN (Access Point Name). This allows an
access point for cellular communication and is used to connect to a DNS server. The APN may contain
up to 32 characters. Default is set to SECURECOM200 when a version 100 or 101 XT30/50 panel is used
and the default is set to SECURECOM400 when a version 102 or higher XT30/50 panel is used. If using
a SecureCom T-Mobile SIM card, enter GRID.T-MOBILE.COM for the APN.
Second GPRS APN (XT30, XT50, and XTL): Enter the second APN (Access Point Name). This works
as a backup in case the first APN fails. The APN may contain up to 32 characters. Default is set to
SECURECOM200 when a version 100 or 101 XT30/50 panel is used and the default is set to
SECURECOM400 when a version 102 or higher XT30/50 panel is used. If using a SecureCom T-Mobile
SIM card, enter GRID.T-MOBILE.COM for the APN.
Note: For Cellular: The message is sent using First GPRS APN and the First IP Address. If no
acknowledgment is received, First GPRS APN and the Second IP address are used, followed, if
needed, by Second GPRS APN and first and second IP addresses, respectively.
Check-in Minutes (XTL, XTLN, and XTLN-WiFi only): Enter the number of minutes (0, or 3 to 240)
between check-in reports. Check-in reports are a method of supervising the panel for communication
with the receiver. Enter 0 (zero) to disable this feature. The default Check-In Minutes is 0 (zero)
minutes.
Fail Time Minutes: Fail Time Minutes allows the receiver to miss a defined number of check-ins
before logging that the panel is missing. For example, if Check-in is 20 minutes and Fail Time is 30
minutes, the receiver only indicates a Panel Not Responding after 30 minutes. The Fail Time must be
equal to or greater than the Check-in Minutes: If the Check-in is 20 minutes, the Fail Time must be 20
minutes or more. The maximum Fail Time is 240 minutes. The default Fail Time is 240 minutes.