Specifications

Note: On XT Series panels, the backup communication is tested at the same frequency as the

main communication.

Test Time: Enter the time of day that the panel transmits an automatic recall test for the main

communication line. This test signal will verify that communication is working properly between the

panel and the central station.

Test Day: Select the day of the week from the drop-down menu that the panel will send a test signal

on the main communications line to the central station. This will send the test signal once a week.

Selecting All from the Recall Day menu will send the test signal every 24 hours.

Test Time (XR150/XR350/XR550 Series/XR500 Series/

XR2500F/XR100 Series): Select the day of the week or the

number of hours from the drop-down menu. This tells the panel

how often to send a test signal using the main communication

path to the central station. Selecting a day of the week sends a

test signal once a week on that day. Selecting All from the Test

Time menu sends the test signal every 24 hours. If more

frequent testing is required, select 2 hours, 4 hours, 8 hours,

or 12 hours instead of making one of the day selections. When

programmed, the test occurs at the programmed minutes indicated in the Automatic Recall Test

Time.

Test Days (XT Series): Select how often the panel sends a test signal using the main and backup

communication paths to the central station. Only the communication paths that are programmed are

available.

Net Test Days (XTLN, XTLN-WiFi): Select how often the panel sends a test signal using network

communication to the central station.

Cell Test Day (XTL): Select how often the panel sends a test signal using cellular communication to

the central station.

Defer Test: Select Yes to allow the panel to defer the programmed automatic recall test. Select No to

send the test report as programmed, regardless of the previous panel communication. Test Frequency

must also be programmed when Defer Test is set to Yes. Not Available on XT Series or XTL panels.

Test Frequency: This allows you to specify, from 1 to 60 days, the maximum length of time between

automatic recall tests. Not Available on XT Series panels.

Example: Two panels, A and B, are programmed the same: Defer Test is set to Yes and Test

Frequency is set to 7.

Panel A: Panel A sends no signals to the receiver during the seven day Test Frequency cycle. On

the seventh day Panel A sends the automatic recall test to the receiver.