Specifications

© 2015 Digital Monitoring Products
Events MGR: The Events Manager menu specifies when the panel will send non-alarm reports.
This Events Manager does not affect zone alarm, zone trouble, zone restoral, supervisory, or
serviceman messages. Also, this feature will not delay closing reports if Closing Wait is checked in
Program > System Options.
Note: The Events Manager menu is not available on XT Series, XTL, XTLN, or XTLN-WiFi
panels.
The following three items are the options in the Events Manager menu:
Send Events Immediately
Delay Events
Keep Events
Note: Contact ID and Modem IIe (M2E) do not delay or keep events, but send them as they
occur.
Program > Comm unicatio ns > Test Tim er Tab
Second Line Test: Allows you to test your backup communication line.
The options in the Second Line Test menu are the following four items:
None: When you select None, the panel does not send a test signal on the second (backup)
communication line.
Regular: When you select Regular, the second line will test each time that your main
communications line is programmed for a test.
Weekly: When you select Weekly, the second line sends a test once per week. When Second Line
Test is set to Weekly, the panel disregards test time deferrals (see Defer Test below).
Monthly (30 days): When you select Monthly, a test of the second line will be sent every 30
days. When you select this option the panel disregards test time deferrals (see Defer Test below).