Specifications

Note: You only need to complete these steps one time. On further connections simply select

the panel and then Connect as explained below.

After you have entered all the Connection Information, open the panel by clicking OK. Then go to

Panel > Connect and click the Connect button. You are now connected to the panel.

Using an XTL or XR150/XR350/XR550 panel

To configure Remote Link to connect to a panel through cellular communication, follow these steps:

1. Select the desired panel in File > Panel Information.

2. In the Connection Information box, select Cellular from the drop-down menu in the Type field.

3. In the Phone Number box, enter the phone number or SIM/MEID # for the cellular communication.

Select OK to apply these changes.

a. To retrieve the phone number or SIM/MEID #:

i. For SecureCom Wireless users, select System > SecureCom Wireless Activations. This shows

a list of all SecureCom activations. Right-click on the SIM/MEID # or phone number of the

panel to copy the number and then paste into the phone number box of the connection

information window.

ii. For non SecureCom SIM cards, enter the SIM phone number into the phone number box.

(Alarm Mo nito ring, Com m and Center, or Advanced Reporting M odule)

Help > Registration

When you receive the module, you will also receive a manual and a certificate containing the serial

number that is needed for proper activation of the program. Once the program is installed on your

computer, enter the serial number in the Help > Registration window. Click the Add button and type

the module's serial number as listed on the certificate.

Note: You must right click on the Remote Link Icon and Run As Administrator before installing

any modules.

1. Go to Help > Registration.

2. Click Add.

3. In the field shown on the left, type the module's serial number as it appears on the certificate.

4. Click OK