Specifications

to move through the programming windows.

Each panel from DMP offers different features. Remote Link displays only the features in the Program

menu that are available on the panel with which you are connected. For more complete descriptions of

the various Program menu options, refer to the appropriate programming guide for the panel model

that you are programming.

Program > Comm unicatio ns

The Communications window is used to configure the panel's communication options. The

Communications window automatically configures itself to show only the features available to the

panel to which you are connected.

The Communications window uses index tabs to divide the program items into four

groups:

Method: The features under the Method Tab allow you to set Communication Type, Second Line

type, Second Line Test, Events Manager, DTMF, Transmit Delay, and Host/Net Setup.

Test Timer: The Test Timer Tab lets you schedule the automatic recall test of the panel's main and

backup communication lines.

Receiver 1: Use the Receiver 1 Tab to instruct the panel to send Alarm, Supervisory/Trouble,

Opening / Closing and User, Test Timer, and Door Access reports to Receiver 1.

Receiver 2: The Receiver 2 Tab allows you to send Alarm, Supervisory/Trouble, Opening / Closing

and User, Test Timer, and Door Access reports to Receiver 2.

Host/Net: The Host/Net Tab provides additional options when Host/Net is selected as the

communication type.

Program > Comm unicatio ns > M ethod Tab

The Method Tab allows you to program the method of which the panel will communicate with the

receiver.