Specifications

Remote Update: Automatically download the selected software file to the trapped panel. Check

this box to enable the Change File option.

Change File: Click to browse and select the software update file location. When selected, the path

to the update file automatically displays.

If you decide to cancel a trap before it occurs, select the appropriate panel in the Trap window and

click Delete.

Note: When a panel trap is set for a panel that uses Network communication type, Remote

Link sends a panel trap message with the panel account number to the SCS-1 or SCS-1R, iCOM

or iCOM-E IP address entered in the TCP Trap tab in Remote Link configuration. The trap

message contains the IP address for the panel iCOM or iCOM-E to use to contact Remote Link

using TCP protocol. The trap message is stored in the receiver iCOM or iCOM-E for up to four

hours. If the trap message is not sent to the panel within the four-hour window, the trap will

be discarded and a new panel trap message must be sent from Remote Link.

When a panel trap message is sent from the receiver iCOM or iCOM-E to a panel, the panel

iCOM or iCOM-E initiates a programming session with Remote Link using the address

specified in the original trap message. Once the programming session starts, the panel iCOM

or iCOM-E sends an S51 Warning: Remote Programming message to the Central Station

indicating a successful connection and that a remote programming session is in progress. This

allows the central station to be aware that a supervised account is being remote programmed.

You can view the status of the panel traps in the receiver iCOM or iCOM-E with the Trap Query

function.

Panel > Set A ll Traps

Selecting Set All Traps from the Panel Menu sends all of the traps you have created in the Trap

window. This allows you to easily send traps after the SCS-105 has been reset while you have Remote

Link open.

Note: In order for the user to initiate a trap, the user must have permission to do so.

Permission to Allow Trap can be given in the Operator Configuration screen of Remote Link.

Permission must be given before the user can initiate a trap.