Specifications

© 2015 Digital Monitoring Products
Panel > Trap
This option
allows you
to initiate
a trap so
that when
a
subscriber'
s panel
contacts
the SCS-1
or SCS-1R
Receiver
or SCS-105
Single Line
Receiver,
it is held
on-line and
will be
connected
to with
Remote Link.
Note: In order for the user to initiate a trap, the user must have permission to do so.
Permission to Allow Trap can be given in the Operator Configuration screen of Remote Link.
Permission must be given before the user can initiate a trap.
To create a trap, go to Panel > Trap. Click the New button and enter the account number of the panel
that you wish to trap with the receiver number as a prefix (for example, . 1-12345). After you enter
the account number in the New Trap window, click OK to return to the Trap window. Select the
options for the trap.
If you program a new Trap and do not select any options in the Trap window, Remote Link will hold the
panel on-line and notify the operator that the panel is holding.
Options
Send File: Select this option to send the entire panel programming to the panel from Remote
Link.
Changes Only: Select this option to send only programming that has changed since the last
communication with the panel. To send changes only, select both the Send File and the Changes
Only boxes.
Retrieve File: Select this option to retrieve the full panel programming from the panel to Remote
Link.
Request Events: Select this option to automatically download the panel's event buffer into the
Remote Link database.
Note: The Remote Update and Change File options are only available on XR150/XR350/XR550
Series, XR2500F, and XR100/XR500 Series panels using TCP trap.