Specifications

separately.

Standard: Requests all events except door access events.

Door Access: Requests only Door Access events.

XR150/XR350/XR550 Series, XR100/XR500 Series, or XR2500F Panels (version 117 or

higher)

The Request Events window allows you to choose all events stored in the panel event buffer, new

events that have occurred since the last download, or only those events that occurred during the time

period selected in the Start and End dates.

Dates to Include

All Events: Requests all events stored in the

panel event buffer based on the type of

event selected. Uncheck this box to select

specific dates.

New Events Only: Requests all events that

have occurred since the last event download.

Select Date Range: Type in the date or use

the drop-down calendar.

Start: Enter the date for the oldest events

you wish to retrieve. The default is the

panel's internal date minus 45 days. The

Start Date for events cannot be more than

45 days previous to the panel's internal date.

End: Enter the last date for the events you

would like to retrieve. The end date cannot

be after the panel's internal date.

Panel Date:

Displays the panel's internal date.

Note: Each time that you request events from the same panel, Remote Link stores those

events in a buffer until you request events again from the same panel. You may print these

events by going to File > Print > Panel Event Buffer.