Specifications

© 2015 Digital Monitoring Products
Panel > System Status > Output Status > Door Tab
The Output Status window allows you to lock and unlock doors and grant door access. Click on the
Door tab near the bottom of the Output Status window.
The Door feature allows you to remotely activate the door access relay on Security Command keypads,
Easy Entry keypads, and 733 or 734/734N/734N-WiFi Wiegand Interface Modules. You must know the
address number of the keypad or 733 or 734/734N/734N-WiFi module to which the door strike is
connected.
There are three commands available under the Door tab:
Lock: Lock the specified door.
Unlock: Unlock the specified door.
Access: Unlock the specified door for 5 seconds.
Panel > System Status
Click the Lockdown button to remotely lock all doors programmed as Public Doors in Device Setup.
This feature can be used in emergency situations where it is necessary to restrict the site's access to
authorized users only.
When the Lockdown button is pushed, Remote Link sends a message to the panel to turn off the
output door relays for the Public Doors programmed in Device Setup. The relays then stay off until
the next scheduled on time.
During a Lockdown, access cards can still be used to access or egress the area.
Note: The Lockdown feature is available for XR150/XR350/XR550 Series, XR2500F, XR100/
XR500 Series, and XR200-485(B) Panels only.
See Device Setup for more information.
Panel > Request Events
To open the Request Events window, select Panel > Request Events.
This option allows you to download a subscriber panel event buffer into the Remote Link database.
All Panels
Select Disconnect on Completion to automatically disconnect from the panel after the panel event
buffer is downloaded into the Remote Link database.
Note: Press the Alt key and F10 key to view the messages in the Diagnostics Window as the
panel is receiving events. Open the Diagnostics Window before clicking the Request button.
To continue, click the Request button. While Remote Link retrieves the events, a status bar appears
on your screen that tracks Remote Link status while downloading events.
Each time you request events from a panel, Remote Link stores those events in a buffer until you
request events again from the same panel.
XR150/XR350/XR550 Series, XR2500F, XR100/XR500 Series, or XR200-485 Panels
The Request Events window provides two options to identify the types of events to request from the
panel. Check the boxes in the Request Events window to download Standard or Door Access events