Specifications

© 2015 Digital Monitoring Products
System Status and click on the Zones button to open the Zone Status window. This window displays
any zone that is bypassed, force armed, open, shorted, or normal. The Zone Status window also allows
you to bypass and reset selected zones.
To view the status of a zone, fill in the Start at Zone, Partition, and Area fields at the top of the
window and click on the Request button. Selecting the 24-hour box will display all 24-hour zones, such
as Fire, Fire Verify, Supervisory, Emergency, and Panic zones.
Panel > System Status > Output Status
The Output Status window allows you to view the status of the relay outputs connected to a panel and
grant Door Access events.
To view the status of outputs on a panel, enter an output number in the Start at Output Number field
at the top of the window and click on the Request button. The Status column below the Request
button displays the current status of each output; Steady, Pulse, or Off.
Turning Outputs On and Off
Door Control
Panel > System Status > Forgive U ser
The Forgive User option allows you to clear a failure to exit violation when using the anti-passback
feature. When a user does not exit the premises with a valid code, the user must be forgiven before
they are allowed to re-enter.
Partition: Enter the partition number that the user or users are assigned.
Note: This option does not appear on the XR150/XR350/XR550 Series, XR2500F, or XR100/
XR500 Series panels.
User: Enter the user number that you wish to forgive an anti-passback violation.
All: Check this box to forgive all anti-passback violations.
Panel > System Status > LX-Bus Diagnostics
The LX Bus Diagnostics window allows you to perform remote diagnostic routines on LX-Bus zones. To
open the LX Bus Diagnostics window, select Panel > System Status and click on the LX Bus
Diagnostics button.
The LX Bus Diagnostics window displays the status of zones connected to the panel's LX-Bus that are
not in a normal state.
- XR550 Series and XR500 Series panels (Zones 500 through 999).
- XR350 Series panels (Zones 500 through 799).
- The XR150 Series XR100N Series panels (Zones 500 through 599).
- XR200, XR200-485(B) panels (Zones 100 through 199 for LX-Bus 1 and Zones 200 through 299 for
LX-Bus 2).
If an LX-Bus zone is not in a normal state, you will receive one of three messages.
Missing: The zone expander is not responding to polling from the panel.