Specifications

The Retrieve function allows you to retrieve a copy of a subscriber panel's programming, schedules,

and user codes.

Note: Close all Remote Link programming windows before retrieving the file from the panel.

After selecting Retrieve, the Retrieve From Panel window appears allowing you to initiate the

retrieval of data from the panel.

Select Request Events to automatically request the panel's events upon completion of the file

retrieval.

Select Update Time to send a time update to the panel after

Remote Link has retrieved the data from the panel.

Select Disconnect on Completion to automatically disconnect

from the panel after the programming has been retrieved

from the panel.

For XR150/XR350/XR550 Series and XR100/XR500 panels

Version 204 or higher, select Changes Only to retrieve only

the programming that has changed since the last connection

with the panel.

XR10/XR350/XR550 Series and XR100/XR500 Series panels

Version 117 or higher have additional retrieve options

available. Refer to Requesting Events.

The Currently Receiving section of the Retrieve From Panel

window tracks the status of the data transfer. The top bar

indicates that communication is occurring between Remote

Link and the panel. The bottom bar tracks the status of the entire file.

After the information has been retrieved, Remote Link displays a window with the message "Panel

Retrieved."

Note: When you retrieve from a panel, any programming changes made in Remote Link that

have not yet been sent to the panel are overwritten by the panel programming information

that you retrieve from the panel.