Specifications

Key in the Panel Information window. Be sure that the Remote Key in the Panel Information window is

the same as that programmed in the panel.

Panel Connection Error: Panel busy with other communication. (-VB)

Panel Connection Error: Panel not connected. (-VN)

Error requesting max partitions: Remote Link could not get the max partitions from the panel.

Connection cancelled: Action aborted by user.

Panel Connection Error: Connection closed. Connection was closed while Remote Link was trying to

send to the panel.

Panel > Disconnect

To disconnect from a panel, select Panel > Disconnect to open the Connection Status window. Click

on the Disconnect button.

Panel > Send

The Send function allows you to send a new or revised program file to a subscriber's panel.

Note: Close all Remote Link programming windows before sending the file to the panel.

To send a program file to a panel, select Panel > Connect and connect to the panel. After selecting

Panel > Send, the Send to Panel window appears allowing you to send the data to the panel. As the

file is being loaded, Remote Link tracks the status of the data transfer.

Before sending the file, you can also select to clear the codes,

schedules, zone, and area information from the panel. Select

Changes Only to send only the programming that has

changed to the panel.

Select Update Time to send a time update to the panel.

Select Disconnect on Completion to automatically disconnect

from the panel after the programming has been sent to the

panel.

The Currently Sending section of the Send To Panel window

tracks the status of the data transfer. The top bar indicates

that communication is occurring between Remote Link and

the panel. The bottom bar tracks the status of the entire file.

Panel > R etrieve