Troubleshooting guide

Output Information

305 Dry Contact Relays

• Single pole, Double throw

• Rated at 1 Amp @ 30 VDC resistive

• May be activated by any of the following:

• Zone condition (open or short)

• Output schedule

• Manually from User Menu

• Communication Fail

• Armed Area annunciation

• Fire Alarm or Fire Trouble

• Other system conditions.

See XR200 Programming Guide (LT-0196)

Voltage Outputs 3 – 10

Voltage outputs are available on XR200, XR2400F and XR200/485 Command Processor™

only.

• 12 VDC

• 50mA resistive

• Activated by same conditions as 305 Dry Contact relay outputs

Annunciator Outputs

Available on XRSuper6, XR6/XR10, XR20, XR40, XR500 Command Processors™ and Output

Expander Model 716.

• Switch to GROUND when activated

• DO NOT provide voltage

• 50mA resistive

• Activated by same conditions as Model 305 Dry Contact Relay and

Voltage outputs

Command Processor™ Models Output Numbers

XRSuper6, XR6/XR10, XR20 & XR40 1 – 4

XR500 3 - 6

-NOTES-

_____________