Troubleshooting guide

6
Diagnostics > [ LX-BUS STATUS ]
The fourth Diagnostic function is the LX-BUS STATUS. This function allows the panel to poll
all devices connected to the LX-Bus of an interface card and check for any OVERLAP,
MISSING or EXTRA addresses.
At the [ LX-BUS STATUS ] display, press any Select key. The display changes to [ OVLP MIS
EXT ]. Press the Select key below the status you wish to check. See the illustration below for
more detail.
-NOTES-
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________
_____________