Specifications
INTRUSION/ACCESS/FIRE/INTEGRATED SYSTEM
PERFORMANCE SPECIFICATION FOR DMP MODEL XR150/XR350/XR550 SERIES
XR150/XR350/XR550 Intrusion/Access/Fire Detection Specification 9
Reporting Dashboard:
A. The software shall have interactive graphics for instant feedback on system activity.
B. The software shall be able to choose a number of charts for functions such as Access Granted /Denied at a particular
access point or an entire facility to get a snapshot of activities within any defined time period.
C. Shall have ability to filter through user, activity, or event data to narrow results and show precisely the information
needed.
D. Shall have the ability to view reports from within the application, or saved and exported to PDF, HTML, XLS, CSV, or
XML format for distribution.
E. Shall automate custom reports to generate and distribute each day at desired times.
4.10 Control Panel Capability
A. The basic control panel shall provide:
Expansion to a total of at least 10,000 user codes with 99 user profile definitions.
Temporary user codes that can be entered with a finite date and specific time to expire.
Sixteen (16) independent door/keypad addresses, each with four zones on XR550 and XR350, with eight (8) on the
XR150.
A total door access granted event buffer of at least 10,000 events.
Anti-passback access control selectable by area and user.
A total of at least 99 programmable Schedules for output relay schedules, area schedules, door schedules, holiday
schedules, and user profiles. The same schedule may be assigned to more than one area, door, or output, making
them reusable. There shall be at least two schedules per user profile with up to four profiles per user. Up to 8
Schedules per user, per door, per area, and per output.
Eight Areas (8) individual reporting areas XR150, Sixteen (16) individual reporting areas XR350, and Thirty-two (32)
individual reporting areas XR550.
Built-in bell and telephone line supervision.
B. The networked control panel shall provide the entire above plus:
All of the above features plus.
Require two-man access code or credentials. Require two user code entries to disarm and/or allow door access to
this area.
Support programming to require the same or different access code entered within a programmed delay time of 1 to
15 minutes after disarming before activating a silent ambush alarm.
Early Morning Ambush. Must disarm a second time with in a programmed period of time or an early morning ambush
silent alarm is sent.
Bank Safe & Vault features. Schedules set for this area and the time of day cannot be changed while the area is
armed.
C. The XR550 encrypted control panel shall provide the entire above plus:
All of the basic and network features listed plus.
Built-in Encrypted Alarm Router.
Certified operation that meets NIST (National Institute of Standards and Technology) standards for
128-bit and 256-bit AES (Advanced Encryption Standard) Encryption.
Certification that encrypted panel is capable of meeting ICD 705 Chapter 7 Intrusion Detection Systems (IDS)
Standard.
Certification that encrypted panel is capable of meeting UL 2050 standards.
Card plus Pin for High security card access is provided by the Card Plus Pin feature that requires both a card read and
a PIN (4-6 digit user ID) entry for arming/disarming and access by area. This Card Plus Pin operation complies with
the ICD 705 requirement for dual id authentication and operates with a DMP Prox Keypad and a HID ProxPro reader
with the keypad connected to a DMP Wiegand Interface module.
Panic Test allows the panic zone test verification and failure results to be sent to the central station receiver.
Passphrase of 8-16 characters to validate encryption between the XR550 with Encryption and the Central Station
Receiver.