Specifications

INTRUSION/ACCESS/FIRE/INTEGRATED SYSTEM
PERFORMANCE SPECIFICATION FOR DMP MODEL XR150/XR350/XR550 SERIES
XR150/XR350/XR550 Intrusion/Access/Fire Detection Specification 23
12.3 Power Supplies and Transformers
Power supply and transformer shall maintain system operation. The batteries shall be checked and replaced every three
to five years. The equipment shall have a three (3) year warranty as stated in the current DMP Product Catalog and
meet or exceed features offered in the following products:
 Power Supply – DMP Model 505-12, 115 VAC, 12 VDC
 Power Supply – DMP Model 505-12LX, 115 VAC, 12 VDC
 Power Supply – DMP Model 505-12L, 12 VDC
 Transformer - DMP Model 327, 16.5 VAC 50 VA, Plug-in
 Transformer - DMP Model 322, 16.5 VAC 56 VA, Wire-in
 Transformer - DMP Model 323, 16.5 VAC 56 VA, Wire-in
 Transformer – DMP Model 324, 16.5 VAC 100 VA, Wire-in
 Transformer – DMP Model 324P, 16.5 VAC 100 VA, Wire-in
12.4 Access Control Equipment
Access control equipment shall provide access control functions between the panel and controller door access points. The
equipment shall have a three (3) year warranty as stated in the current DMP Product Catalog and meet or exceed
features offered in the following products:
 Interface Module – DMP Model 734, 734N, or 734N-WIFI Wiegand Interface Module
 Egress Module – DMP Model PB-2 REX Button
 Reader – DMP Model PP-6005B Proxpoint Plus©
 Reader – DMP Model MP-5365 Miniprox©
 Reader – DMP Model MX-5375 Maxi-Prox™
 Reader – DMP Model TL-5395 Thinline II™
 Door Controller – DMP Model 1306P Prox Patch™
 Door Controller – DMP Model 1306PW Prox Patch™
 Access Card – DMP Model 1351 ProxPass© Card
 Access Card – DMP Model 1326 Proxcard II© Card
 Access Device – DMP Model 1346 Proxkey II™ Keyfob, 1386 Isoprox II©
12.5 Cellular Communications Equipment
Cellular Communications equipment shall plug directly into the XR150/XR350/XR550 PCB J24 connector and shall be
supervised by the XR150/XR350/XR550 control panel. The Cellular Communications Equipment shall be of a low current
draw and powered directly by the XR150/XR350/XR550 Control Communicator.
The Cellular Communicator shall communicate in the SDLC Serial 3 Format for communications directly to a SCS-1R or
SCS-VR DMP Central Station Receiver. The equipment shall have a three (3) year warranty as stated in the current DMP
Product Catalog and meet or exceed features offered in the following products:
 263H Digital HSPA+ Digital Cellular Communicator
 263C CDMA Digital Cellular Communicator
 380-400 Level 400 SIM Card (263H only)
 381-2 18” Coax Cable

381-12 12’ Coax Extension
 381-25 25’ Coax Extension
 383 Rubber Duck Antenna
 386 Wall Mount Antenna Bracket
 387-1 3DB Fiberglass Antenna w/Bracket
 387-3 3DB MEG Antenna
 387-4 SMA to N Cable, 4ft
 387-25 SMA to N Cable, 25ft
 387-50 SMA to N Cable, 50ft