Specifications
20  XR150/XR350/XR550 Intrusion/Access/Fire Detection Specification 
10.0 BURGLARY CONTROL SPECIFICATIONS 
10.1 Burglary Standards 
The Burglary system shall be listed as a Power Limited Device and be listed under the standards below. Each system shall 
be supplied with complete details on all installation criteria necessary to meet all of the listings. 
Burglary Listings  Canadian Burglary Listings 
UL 1023 Household Burglar Alarm System Units  ULC C1023 Household Burglar Alarm System Units 
UL 1076 Proprietary Burglar  ULC/ORD-C1076 Proprietary Burglar 
UL 1610 Central Station Burglar Alarm Units  ULC S304 Central Station Burglar Alarm Units 
UL 1635 Digital Burglar Alarm Communicator System 
Units 
U.S. Government Standards   
Meets ICD 705 Chapter 7 Intrusion Detection Systems 
(IDS) 
Meets DoD/NIST SCIF Standards   
Meets ANSI/SIA CP-01-2010 False Alarm Reduction   
10.2 Area System Mode 
A. The system user shall be capable of selectively arming and disarming any one or more of 32 areas within the intrusion 
detection system based on the user PIN code and/or keypad used. Each of the 574 zones shall be able to be assigned to 
any of the 32 available areas. The system shall be capable of having up to a thirty-two (32) character length name 
programmed for each area. 
B. The system user shall be capable of assigning an opening and closing schedule to all areas or to each of the 32 areas 
separately. Each area shall be able to arm or disarm automatically by a schedule. The system shall have the capacity 
for common areas that automatically disarm when any other area disarms and that automatically arm when all others 
areas arm. 
C. The networked system shall have the ability to comply with Bank Safe & Vault application. The networked system shall 
also have the ability to use a two-man rule for disarming or allowing door access to an area. The system shall have the 
ability to operate a Common Area application. 
D. The Encrypted system shall have the feature of Card Plus Pin by area High security card access is provided by the Card 
Plus Pin feature that requires both a card read and a PIN (4-6 digit user ID) entry for arming/disarming and access by 
area. This Card Plus Pin operation complies with the ICPG 705 requirement for dual id authentication and operates with 
a DMP Prox Keypad and a HID ProxPro reader with the keypad connected to a DMP Wiegand Interface module. 
10.3 Home/Sleep/Away Mode 
The system shall be capable of being configured in a Home/Sleep/Away configuration for Residential applications. The 
system shall consist of a Main House system and up to two Guest House systems within one single control Panel with 
each house being controlled with its own keypad as if it were separate alarm systems. 
10.4 All/Perimeter Mode 
The system shall be capable of being configured into the All/Perimeter configuration to enable the selective arming of 
both the interior and perimeter when armed “All” or arming just the perimeter devices if arming “Perimeter”. 
10.5 Zones 
The system shall have a minimum of eight (8) grounded burglary zones available from the control panel, and two floating 
ground powered zones for two wire type compatible smoke detectors. The system shall have the ability to expand using 
the panel’s keypad bus for up to sixty-four additional zones. The system shall also have five built-in zone expansion bus 
(LX500 – LX900) for an additional 500 zones of expansion. The system shall have the ability to integrate up to 500 
wireless zones for a total of 574 zones overall. 
10.6 Burglary Equipment 
Burglary detection equipment shall communicate to the system by way of the control panel loop expansion bus or 900MHz 
bi-directional spread spectrum receiver. The detection equipment shall have a three (3) year warranty and meet or 
exceed features offered in the products listed in Section 11.0 of this document. 
10.7 Z-Wave Equipment 
The system shall be capable of 232 Z-Wave devices by means of the use of the model 738Z module. The system shall have 
the capability of up to 20 Z-Wave favorites for grouping Z-Wave devices into a favorite response or control. 










