Specifications

Important Points Explanation Response
Relay states when
triggered
Because we intend to integrate this system with many of our other
electronic systems within the building, we require that the triggering of
relays be as flexible as possible. Can your system’s relay outputs be
selected for status to follow zone input status, pulsed output, and
maintained outputs.
Yes No
Relay states according
to the state of the
zone input
Because we intend to integrate this system with many of our other
electronic systems within the building, we require that the triggering of
relays be as flexible as possible. Can your system’s relay outputs be
configured for different responses based upon the armed state of the
zone?
Yes No
Relay associations to
zones based upon
system and zone
states.
Because we intend to integrate this system with many of our other
electronic systems within the building, we require that the triggering of
relays be as flexible as possible. Can you assign different relays for each
zone based upon whether the system is armed and the zone is open, the
system is disarmed and the zone is open, the system is armed and the
zone is shorted, and the system is disarmed and the zone is shorted?
Yes No
Common descriptions
for zone, area, and
user designations.
Because we wish to minimize confusion in various ways that we use
reporting, we require that descriptions for areas of our building, users of
the system, and zone inputs connected to the system offer at least
sixteen (16) characters to maximize user understanding. These
descriptions must be programmed and stored in one location, and appear
exactly the same in stored events, printed logs, and appear remotely at
the central monitoring station. Does your system provide this capability?
Yes No
Flexible user interface
capabilities
Because we may use the system from many locations, in many ways, we
require that the system offer user interface capabilities from local
keypads, web browsers, software packages, radio frequency remote
arming stations, and must also offer the capability to use any zone input
for arming and disarming. Does your system offer all of these capabilities?
Yes No
Economical system
additions for access
control
Because we are looking for a cost-competitive system design, the system
shall be capable of adding up to eight (8) door access locations without
requiring additional control panels. To minimize cabling costs, the system
wiring must support a single four-wire cable to connect up to eight (8)
doors, and must use remote intelligent devices to collect door status,
user identification devices, and triggers to unlock distant doors. Does
your system offer this capability?
Yes No
Contractor experience Because we require that the installing company is experienced and factory
trained. We require each installer and service person who works on our
system to be factory trained and must submit a certificate issued by the
factory as proof of this training. Can your company provide these
certification documents?
Yes No
LT-0950 © 2014 Digital Monitoring Products, Inc.
14175