Specifications

22 XR100/XR100N Intrusion/Access/Fire Detection Specification
12.3 Notification Devices
Notification equipment shall be control panel activated by way of the supervised bell output module. The equipment
shall have a three (3) year warranty as stated in the current DMP Product Catalog and meet or exceed features
offered in the following products:
 Bells – Wheelock Model MB-G6-12, MB-G10-12
 Horns – Wheelock Model MT-12/24
 Strobe – Wheelock Model RSS-121575W-F, RSSP-121575W-F
 Horn Strobe – Wheelock Model NS-121575W-F
 Notification/Synchronization Modules – Wheelock Model SM-12/24-R. DSM-12/24-R
Note: If using an external NAC power supply, use devices listed for that particular power supply.
12.4 Power Supplies and Transformers
Power supply, transformer, and battery devices shall maintain system operation. The batteries shall be checked and
replaced every three to five years. The equipment shall have a three (3) year warranty as stated in the current DMP
Product Catalog and meet or exceed features offered in the following products:
 Power Supply – DMP Model 505-12, 115 Vac, 12 Vdc
 Power Supply – DMP Model 505-12LX, 115 Vac, 12 Vdc
 Power Supply – DMP Model 505-12L 12 Vdc
 Transformer - DMP Model 327, 16.5 Vac 50 VA, Plug-in
 Transformer - DMP Model 322, 16.5 Vac 56 VA, Wire-in
 Transformer - DMP Model 323, 16.5 Vac 56 VA, Wire-in
 Transformer – DMP Model 324, 16.5 Vac 100 VA, Wire-in
 Transformer – DMP Model 324P, 16.5 Vac 100 VA, Wire-in
12.5 Access Control Equipment
Access control equipment shall provide access control functions between the panel and controller door access points.
The equipment shall have a three (3) year warranty as stated in the current DMP Product Catalog and meet or
exceed features offered in the following products:
 Interface Module – DMP Model 734, 734N, or 734N-WIFI Wiegand Interface Module
 Egress Module – DMP Model PB-2 REX Button
 Reader – DMP Model PP-6005B Proxpoint Plus©
 Reader – DMP Model MP-5365 Miniprox©
 Reader – DMP Model MX-5375 Maxi-Prox™
 Reader – DMP Model TL-5395 Thinline II™
 Door Controller – DMP Model 1306P Prox Patch™
 Door Controller – DMP Model 1306PW Prox Patch™
 Access Card – DMP Model 1351 ProxPass© Card
 Access Card – DMP Model 1326 Proxcard II© Card
 Access Device – DMP Model 1346 Proxkey II™ Keyfob, 1386 Isoprox II©
12.6 Cellular Communications Equipment
Cellular Communications equipment shall plug directly into the XR100 J6 connector and shall be supervised by the
XR100 Control Communicator. The Cellular Communications Equipment shall be of a low current draw and powered
directly by the XR100 Control Communicator.
The Cellular Communicator shall communicate in the SDLC Serial 3 Format for communications directly to a SCS-1R
DMP Central Station Receiver. The equipment shall have a three (3) year warranty as stated in the current DMP
Product Catalog and meet or exceed features offered in the following products:
 463C CDMA Cellular Communicator
 464-263C CDMA Cellular Communicator
 464-263H HSPA+ Cellular Communicator
 376 DC Plug-in Power Supply
 380-400 Level 400 SIM Card (464-263H only)
 381-12 12’ Coax Extension
 381-25 25’ Coax Extension
 383 Rubber Duck Antenna
 386 Wall Mount Antenna Bracket
 387-1 3DB Fiberglass Antenna w/Bracket
 387-3 3DB MEG Antenna
 387-4 SMA to N Cable, 4ft
 387-25 SMA to N Cable, 25ft
 387-50 SMA to N Cable, 50ft