Datasheet

SPEC SHEET
1125 PIR MOTION DETECTOR
Suitable for almost any application, the
Model 1125 PIR Motion Detector includes a
variety of lens conguration options. Use
curtain masks to ensure
proper focus for maximum
security throughout the
protected space. Select
the Bi-Curtain or Standard
mode operation depending
on the sensitivity required
for the application. Also
se lect a 33’ x 33’ or
50’ x 50’ coverage area
to ensure no space is left
unprotected.
1126 SERIES PIR MOTION
DETECTORS
The 1126 Series PIR Motion Detectors are
compact wireless motion
sensors. Offering a 360°,
Spot, Curtain, or Wide
Angle version makes the
1126 Series exible for a
variety of ceiling mount
applications. To save
battery life, select YES for Disarm Disable
in Zone Programming. This allows the 1126
PIR to be disabled for Night and Exit type
zones while the area is disarmed.
1127 WALL-MOUNT
PIR MOTION
DETECTOR
The 1127C curtain PIR covers
a 50-foot detection area
using a Fresnel lens. The
1127W wide-angle PIR covers
a 36-foot by 84-degree angle
area using a Fresnel lens, with pet immunity
up to 40 pounds. Both versions exhibit
excellent R.F.I. and noise immunity, and
include a case tamper.
1129 GLASSBREAK DETECTOR
Designed to detect the shattering of framed
glass mounted in an outside wall, this sensor
is also suitable for armor-coated glass. The
360° microphone can detect through blinds
and light drapes within a 12’ range and also
recognizes the “quiet break” favored by
experienced intruders.
Ideal where hardwired acoustic sensors are
impractical, the 1129 incorporates Pattern
Recognition Technology™ to ignore most
false alarm sounds.
1131 RECESSED CONTACT
The 1131 Wireless Recessed Contact provides
concealed protection for doors, windows, or
any other application needing a discreet
contact. The on-board LED provides built-in
survey capability to allow for single-person
installations, eliminating the requirement
for an external survey kit. The 1131
transmits Normal, Alarm, and Low Battery
conditions.
1139 BILL TRAP
Designed to provide a silent alarm option
for cash drawer operators, the 1139 holds
a trapped bill below a stack of bills. When
the trapped bill is removed, a panic alarm
is sent to the receiver.
To reduce the possibility of a false alarm,
a programmable delay can provide time to
replace the bill should it be accidentally
removed.
1142 & 1142BC TWO-BUTTON
HOLD-UP TRANSMITTER
The Model 1142 and 1142BC Two-Button
Hold-up transmitters are typically used as
a panic alarm, but with a little imagination
this transmitter can be used for a multitude
of applications.
Use the optional belt
clip and attach the
1142BC to your pocket
or belt for local mobile
p r o t e c t i o n .
Permanently mount the 1142 in an under-
the-counter location with the included
screws for UL installations.
KEY FOB TRANSMITTERS
The 1100 Series Key Fob transmitters are
portable, water resistant, and designed to
be clipped to a keychain or lanyard. The key
fob LED provides visual acknowledgement
when a button is pressed
and responds to each
separate operation with
specific color- coded
LED status displays.
1145 Key Fob 4-button
1146 Key Fob 2-button
1147 Key Fob 1-button
1161 & 1162 RESIDENTIAL
SMOKE DETECTORS
The Model 1161 Smoke Detector with
Sounder, and 1162 Smoke/Heat Detector
with Sounder are wireless detectors for
residential applications.
Model 1162 also offers a
built-in fixed and rate-
of-rise heat detector.
The fixed temperature
function responds to the
135° temperature setting
and the rate-of-rise function detects and
responds to a rapid temperature increase.
When tripped, either function sends an
alarm to the panel.
DEVICES FOR USE WITH THE
XR100/XR500 USING THE
1100X OR 1100XH RECEIVER
1165/1165H/1165HS, and 1181/1182.
1165/1165H/1165HS
COMMERCIAL SMOKE
DETECTORS
The Model 1165 Smoke Detector, 1165H
Smoke/Heat Detector, and 1165HS Smoke/
Heat Detector with Sounder include a
tamper switch that sends a trouble signal if
the detector is removed from the mounting
base.
1181 POST INDICATOR VALVE
The model 1181 PIV is a weather proof
and tamper resistant
w i r e l e s s s w i t c h
for monitoring the
open position of re
s p r i n k l e r c o n t r ol
values of the post
indicator, buttery and other types.
1182 OS&Y
The 1182 OS&Y Switch is used to monitor
the open position of an OS&Y (Outside Screw
and Yoke) type gate valve. The 1182 mounts
conveniently to most OS&Y valves ranging in
size from ½” to 12”. The switch operates the
external contacts of the wireless transmitter
when the valve position is altered from an
open state.