Datasheet
DMP 1100 SERIES TRANSMITTERS
TWO-WAY
COMMUNICATION
Superior to traditional wireless
equipment that just broadcasts
the signal, DMP 1100 Series transmitters
require an acknowledgement from the
wireless receiver, indicating successful
communication. This smart technology
ensures that each and every communication
is received and efciently processed at the
panel.
900MHz SPREAD-SPECTRUM
TECHNOLOGY
DMP wireless communication employs
900M Hz frequency -h opping spread-
spectrum to ensure clear and accurate
signal transmissions without interference
in practically any environment.
INCREASED SECURITY
DMP wireless receivers supervise for
transmitters that go missing. With Two-Way
communication, each wireless transmitter
communicates with the receiver using
supervision messages. Each transmitter
can be programmed for no supervision or
a 3, 60, or 240 minute window providing
exibility and allowing increased security
for those applications that require shorter
supervision times.
When the receiver does not receive any
supervision messages from the transmitter
for the programmed window of time,
the receiver reports the zone or output
as missing to the panel for display and
reporting to the Central Station.
EXTENDED BATTERY LIFE
Programming each wireless device with
a specific communication test interval
eliminates wasteful, repetitive signaling.
By eliminating multiple rounds of repetitive
signals, Two-Way communication extends
battery life.
SIMPLE PROGRAMMING
No special equipment is needed to program
the system! Assign wireless transmitters to
zones or outputs during panel programming
with Remote Link™ or from the keypad.
1101 UNIVERSAL TRANSMITTER
The Model 1101 Universal Transmitter
provides Internal and External contacts
that may be used at the same time to yield
TWO individual reporting zones from one
transmitter. This functionality makes the
1101 perfect for applications where a door
and window (or any type of N/O or N/C
contact) are in close proximity.
1102 UNIVERSAL TRANSMITTER
Model 1102 Universal Transmitter provides
the same look and reliability of the 1101
without an internal contact. Simply connect
any Normally Open or Normally Closed
contact to the 1102 Transmitter two-wire
terminal block.
1101/1102/1103
1103 UNIVERSAL TRANSMITTER
Model 1103 Universal Transmitter is typically
used in commercial re or burglary door/
window applications. It offers the same look
and features as the 1101 transmitter, with
the addition of a 470k end-of-line resistor
and wall tamper switch.
1
105 UNIVERSAL
TRANSMITTER
The 1105 Universal Transmitter is less than
half the size of 1101/1102 series, providing
for more mounting options and more
discrete placement.
This 2-input transmitter is typically used
for door/window applications. The internal
and external contacts can be programmed
to operate at the same
time, pro v i d i n g two
independent zones from
one transmitter.
1114 FOUR-ZONE EXPANDER
The 1114 Four-Zone Expander increases the
number of reporting zones available on DMP
panels. The four zones can be used with
burglary and non-powered devices.
1114/1116
1116 RELAY OUTPUT
The 1116 Relay Output provides a Form C
(SPDT) dry relay contact rated for 1 Amp @ 30
VDC. Program the 1116 with a slow or fast
response time to t your application.
1117 LED ANNUNCIATOR
The 1117 LED Annunciator provides one
remote LED that can be used to visually
notify the user about conditions such as
armed area annunciation, ambush alarm,
burglary alarm, exit timer, entry timer,
schedules, or communication failure.
1117/1118
1118 REMOTE INDICATOR LIGHT
The 1118 Remote Indicator Light provides
one remote LED indicator for XR100 and
XR500 Series Panels that visually indicates
when a panic alarm has been activated.
Install in a break room, storage area, or
anywhere not visible to the teller line or
lobby where a notication LED could be
used.
1119 WIRELESS SOUNDER
This single-zone sounder serves as both a
burglary and audible alert device, sending a
signal to the panel while creating an audible
tone. In retail/commercial applications,
it provides a lower-cost alternative to
sounders available as an add-on with crash
bars. Connecting the zone input to a door
contact allows it to trigger the sounder
immediately.
1121 PIR MOTION DETECTOR
The Model 1121 PIR (Passive Infrared)
Motion Detector with Pet
Immunity is suitable for
most residential or small
commercial applications.
With a generous coverage
area of 90° 50' X 50', the
1121 is a favorite among
security professionals.