Datasheet

SPEC SHEET
REQUEST-TO-EXIT (REX)
To enable easy user exit from an area,
connect a motion sensing or mechanical
device to Zone 3 on the keypad. As the
user trips the zone, the keypad activates
the door strike allowing the user to exit
the area without presenting a card or
entering a user code.
PRIVATE LABELING
DMP offers dealers the option to present
their company logo on the 7000 Series
keypads. The logo displays on the rubber
logo insert and replaces the DMP logo.
The backlighted logo glows Green during
normal operation and turns Red in an
alarm state.
Logo Location
UNIVERSAL PROGRAMMING
TOOL
System installation and programming
can be achieved without carrying
around or purchasing expensive external
programmers since panel and add‑on
module programming is integrated into
DMP Keypads.
Individually program panels, an iCOM
Network Alarm Router, iCOMSL Network
Alarm Com muni cato r, and other
programmable add‑on modules directly
from the keypad.
7070/7073 FOUR EXPANSION
ZONES
Zone expansion is available right on the
keypad where you need it the most. The
four expansion zones on the 7070 and
7073 models are fully programmable
Class B protection zones that can be used
for a variety of re, burglary, and access
control applications.
ZONE TYPE SELECTION
Keypad zones can be programmed using
the same zone types available on the
panel. Select supervised, unsupervised,
night, re, panic, exit, and emergency
operation depending on the user
requirements.
ZONE DEVICE CHOICES
Connect PIRs, door and window contacts,
pull stations, sprinkler tamper switches,
and silent panic buttons. Plan the
installation to afford the best coverage
while eliminating potential problems
associated with multiple wire runs.
7063/7073 CODELESS ARMING
AND DISARMING
The innovative 7063 and 7073 Thinline
keypads contain an on-board DMP
proximity reader that allows users
to simply present their proximity
credentials to the keypad to gain access
to a protected area.
7073 SOFT-SHUNT®
MOMENTARY BYPASS
To provide an entry and exit window
on systems with 24-hour perimeter
p r o t e c t i o n , D M P o f f e r s t h e
Soft‑Shunt® feature. Soft‑Shunt allows
the user enough time to enter or exit the
area. If the door remains open when the
timer expires, a zone open/short is sent
to the panel for the keypad Zone 2.
Place Your
Logo Here
KEYPAD MODEL FEATURES
Model 2-Button Panic Red in Alarm 4-Zones Internal Prox Reader
Wiegand Input
Internal Form C
Door Strike Relay
7060 X X
7063 X X X
7070 X X X
7073 X X X X X