Datasheet

specifications
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
hardware specifications
Switch
Architecture Back-plane (Switching Fabric): 7.4Gbps
Packet throughput ability (Full Duplex):
11 Mpps @64bytes
Transfer Rate 14,880pps for Ethernet port
148,800pps for Fast Ethernet port
1,488,000pps for Gigabit Fiber
Ethernet port
Packet Buffer 1Mbits
Mac Address 8K MAC address table
Flash ROM 4Mbytes
DRAM 32Mbytes
Connector
1
10/100TX: 7 × RJ45
10/100/1000T/Mini-GBIC Combo:
3 × RJ45 + 3 × 100/1000 SFP sockets
RS232 connector: RJ45 type
DI/DO 2 Digital Input (DI): Level 0 : -30–2V
Level 1 : 10–30V
Max. input current 8mA
2 Digital Output (DO): Open collector to
40 VDC, 200mA
Network Cable 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5
cable. EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5/5E
cable. EIA/TIA-568 100-ohm (100m)
1000Base-TX: 2-pair UTP/STP Cat. 5e
or 6 cable. EIA/TIA-568 100-ohm (100m)
Optical Fiber
1
Multimode: 50/125µm - 62.5/125µm
Single Mode: 9/125µm
Requires selection of sold-separately SFP Modules.
See ComNet data sheet “SFP Small Form-Factor
Pluggable Modules” for number and description of
SFP modules.
1
Multimode fiber needs to meet or exceed fiber standard ITU-T G.651.
Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
Protocol CSMA/CD
LED 10/100TX: Link/Activity (Green)
Full Duplex/Collision (Yellow)
Giga Copper: Link/Activity (Green)
Speed: 1000Mbps (Green)
SFP: Link/Activity (Green)
Power (Green), Power 1 (Green),
Power 2 (Green), Fault (Red),
Master (Green)
Reserve Polarity
Protection Present
Overload Current
Protection Present
Power Supply 12 - 48VDC, Redundant power with
polarity reverse protect function
and removable terminal block
Power Consumption <6 Watts
Operating Humidity 5% to 95% (Non-condensing)
Operating Temperature -40˚C to 75˚C
Storage Temperature -40˚C – 85˚C
Case Dimensions Metal case. IP-30,
72mm (W) × 105mm (D) × 152mm (H)
2.84” (W) × 4.13” (D) × 5.98” (H)
Installation DIN Rail and Wall Mount Design
EMI FCC Class A, CE EN61000-4-2 (ESD), CE
EN61000-4-3 (RS), CE EN61000-4-4 (EFT),
CE EN61000-4-5 (Surge), CE EN55022, CE
EN61000-4-6 (CS), CE EN61000-4-8, CE
EN61000-6-2, CE EN61000-6-4
Safety UL, cUL, CE/EN60950-1
Stability Testing IEC60068-2-32 (Free fall),
IEC60068-2-27 (Shock),
IEC60068-2-6 (Vibration)
Environmentally Hardened Managed Ethernet Switch with (7) 10/100TX + (3) 10/100/1000TX / 1000FX Ports
24VDC Plug in Power Supply, 90-264VAC, 50/60Hz (Included)
PS24-1A – 24VAC DIN Rail Power supply (sold separately)
PART
NUMBER
CNGE3FE7MS2
Accessories
DESCRIPTION
environmentally hardened managed Ethernet switch with
(7) 10/100TX + (3) configurable 10/100/1000TX / 1000FX ports
CNGE3FE7MS2