User`s guide
Arming and Disarming XT30/XT50 User’s Guide 19
Keypad Shortcut Keys
Your LCD keypad provides one-button shortcut keys. Holding down
the selected keypad button for two seconds until the tone re-sounds
allows you to arm, monitor, or reset your system. These options
can still be accessed through the User Menu if desired.
Keypad Key Arming System Operation
Press Key 1 Arm Away for Home/Sleep/Away systems
Arm All for All/Perimeter systems
Press Key 2 Sensor (Fire) Reset on all systems
Press Key 3 Arm Home for Home/Sleep/Away systems
Press Key 4 Check-in Report on all systems
Press Key 5 Monitor (Chime) on all systems
Press Key 6 Arm Perimeter for All/Perimeter systems
Press Key 7 Arm Sleep for Home/Sleep/Away systems
Press Key 8 Easy Exit for Home/Sleep/Away systems
Disarming a Home/Away System
1. During entry delay, the keypad displays ENTER CODE:. Enter
your user code.
2. The keypad then displays any alarms or communication
problems that occurred during the armed period.
3. The keypad next displays ALL SYSTEM OFFtoconrmthe
system is disarmed.
Disarming During an Alarm
1. While the alarm bell or siren sounds, you may choose to
enter your user code to silence the alarm sounder.
For a burglary alarm, the keypad displays
CANCEL VERIFY
and after the pre-programmed alarm communication
delay, the alarm is sent to the Central Station.
This allows you to investigate the alarm prior to disarming
the system. This display remains on the keypad until a
selection is made, the Back Arrow is pressed, or the internal
system bell cutoff timer expires.
2. If a valid alarm has not occurred, Select CANCEL to disarm
the system and cancel the alarm.
The keypad displays ALARM CANCELLED then ALL SYSTEM
OFFtoconrmthesystemisdisarmed.
OR
If the alarm is valid, select VERIFY to send a verify message
to the Central Station.
1 2 3 4
9 0 CMD
5 6 7 8
A
C
B
D
F
E
G
I
H
J
L
K
V
X
W
S
U
T
P
R
Q
M
O
N
Y
Z
All
Away
Home
Chime
(Monitor)
Perimeter
Sleep
Check-in Report
(Latch Key)
Sensor Reset
(Fire Reset)
Easy Exit
Keypad Shortcut Keys