Installation guide
Digital Monitoring Products XR5 Installation Guide
2
INTRODUCTION
XR5 Installation Guide Digital Monitoring Products
3
INTRODUCTION
System Components
3.1 Description
A basic XR5 system is made up of the alarm panel with built-in communicator, an enclosure, a 16.5 VAC
wire-in transformer, and a 12 VDC 7.0 Ah battery. You can add up to two alphanumeric Security Command
keypads and one or more LED Security Command keypads to the panel and also connect control and
annunciating devices to the panel’s Form C and annunciator outputs. Refer to section 6.6 in this guide
when calculating power requirements.
3.2 XR5FC Wiring Diagram
The XR5FC system below shows some of the accessory devices you can connect for use in various
applications.
Figure 1: XR5FC Wiring Diagram