Installation guide

Digital Monitoring Products XR5 Installation Guide
iv
REVISIONS
XR5 Installation Guide Digital Monitoring Products
1
INTRODUCTION
Revisions to This Document
This section explains the changes that were made to this document during this revision. This section lists the date
the change was made, the section number and section heading, and a quick summary of the change.
Date Section Number and Heading Quick Explanation of Changes
3/05 Section 2.1 and 5.2 Added paragraph regarding ground faults.
Section 10.1 Class A Fire Zone Description Claried voltage measurement information.
Back Page Added Listings and Approvals.
4/04 Sections 3.2, 3.3, and 6.1 Added battery model 369.
Sections 3.5 and 6.6 Added keypad models 690F and 790F.
Battery Calculations Chart updated to reect current
products, added/revised current draw information.
4.5 Terminal Wiring Connections Section added explaining how to run multiple wires under
one terminal.
5.1 Installing the Transformer Section added explaining proper transformer installation.
Note: Subsequent numbers in the section were affected.
5.2 Terminals 1 and 2 Note added explaining Bell Trouble on 866 Modules after
power is applied to the panel.
3/02 4.4 Wiring Keypads Added Wiring Specications.
6.6 XR5FC and XR5SL Power Requirements Updated current draw chart.