Specifications

Zone 2 Soft-Shunt™
This option is intended for DMP 791 and 793 Easy Entry™ Keypads. Leave the option set to NO.
Zone 3 Request to Exit
This option is intended for DMP 791 and 793 Easy Entry™ Keypads. Leave the option set to NO.
4-Digit Entry Cards
This option is intended for DMP 791 and 793 Easy Entry™ Keypads. Leave the option set to NO.
ALL? NO YES DELAY: 2
This option is intended for DMP 791 and 793 Easy Entry™ Keypads. Leave the option set to NO.
Keypad Diagnostics (KPD DIAG)
This option allows you to:
• check the display segments
• check the keyboard backlighting
• test individual keys
Press the Select key under KPD DIAG. The keypad lights all segments of the display and illuminates the keyboard in
Green. A few seconds later the keypad turns off the display and illuminates the keyboard in Red. The keypad then
alternates between these two states for approximately two minutes.
Press COMMAND at any time to continue. The display changes to PRESS KEY TO TEST. This option allows you to test
each key on the keyboard to ensure it's operating properly. Press and hold each key for about two seconds. The
number of the key being held appears in the display. Verify it is the correct number before testing the next key.
Zone test (790 Series keypads only)
This option allows the keypad to display the current electrical status of the 790 keypad's four protection zones. The
status is shown as either OPEN, SHRT, or OKAY.
INPUT WIEGAND
This option works on the DMP Model 791 and 793 Easy Entry™ Keypads only.
Exiting the Installer Options
When done, press the COMMAND key once to return to the Installer Options screen. Press the Select key under STOP
to exit the Installer Options function.
LT-0263 (4/03) © 2003 Digital Monitoring Products, Inc.
INTRUSION • FIRE • ACCESS • NETWORKS
2500 North Partnership Boulevard
800-641-4282
www.dmp.com
Made in the USA
Springfield, Missouri 65803-8877
Specifications
Operating Voltage: 8.0 to 16 VDC.
Current Draw:
690 100mA standby and alarm
790 Standby: 100mA + 1.6mA
per active zone
Alarm: 100mA + 2mA per
active zone
Dimensions: 6.75” W x 5” H x 1” D
Compatible Panels
All DMP Command Processor
®
Panels
Accessories
Model Description
695 Conduit Backbox
696 Keypad Backbox
699 Keypad Deskstand
DMP Zone Expander Modules