User`s guide

3 - HARDWARE DESCRIPTION
4
SCS-1 Install/User's Guide
2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282
MODEL SCS-1 SECURITY CONTROL RECEIVER
3.1 Description
The DMP SCS-1 Receiver as shipped from the factory includes all of the necessary system components to
provide two lines of receiving capability. This package can be expanded to a maximum of five incoming lines.
The SCS-1 includes the following:
Quantity Model Number Name
1 SCS-201 System Enclosure
1 SCS-1062 Processor Card
2 SCS-100 Line Card
1 SCS-110 Modem Power Supply Card
1 SCS-120 Multibus Power Supply Card
1 SCS-130 Transformer Card
1 SCS-208 Power Cord
1 SCS-203 Convenience Panel
1 SCS-PTR Printer and Cable
1 SCS-CRT CRT Display, Keyboard and Cable
A detailed installation and operational description for each component follows in this section.
MODEL SCS-201 SYSTEM ENCLOSURE
3.2 Description
The SCS-201 provides housing for the receiver processor, power supply, line cards, and associated cables. The
enclosure measures 13" deep, 9.75" high and 20" wide.
3.2A Modem Rack
Contained in the top of the System Enclosure is a 5.25" modem rack. The rack holds the modem power supply
card and up to five line cards. The transformer card for connecting the 120 VAC is mounted on the rear of the
modem rack.
3.2B Multibus Rack
Contained in the bottom of the System Enclosure is a 3.5" multibus rack with cooling fan. The multibus rack
holds the processor card and the multibus power supply card.
3.2C Installation
Connect the System Enclosure to earth ground before making any connections to the modules. Use a minimum
14 gauge wire for grounding. A crimp type spade connector is provided for connecting the ground wire to the
ground lug on the modem rack.
Modem
Rack
Multibus
Rack
SCS-100
Line Cards
Front View
115 Volt
AC Input
Ground Lug
3 Amp
Fuse
SCS-130
Transformer
Card
Fan
Rear View
SCS-110
Modem Power Supply
SCS-120
Multibus
Power Supply
SCS-1062
Processor