User`s guide

42
2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282
SCS-1 Install/User's Guide
5 - PRINTOUT EXPLANATIONS
UNDEFINED MESSAGE:
This message is listed when a data transmission from a panel does not conform to the specified format. The
numbers represented by 0 in the example are the hexadecimal bytes that were transmitted. This message
should be considered an alarm. If interpretation of the hexadecimal code is necessary, contact DMP technical
Support.
Automatic Recall OK:
This message is transmitted during the automatic recall test when an abnormal or unrestored condition exists.
5.19 Acknowledgment of Fire and Supervisory Alarms and Troubles
This message is listed each time a fire or supervisory type zone alarm or trouble message is acknowledged by
the operator. The message includes the account number, zone number, and the acknowledged condition.
An example is shown on line 24 of the sample printout.
5.20 Message Destinations
Activity
Log CRT
Operator Signon/Signoff X
Time/Day/Date X
Operator Codes X
System Number X
Telephone Line Configuration X
Network Definitions X
Loop Alarm X X
Loop Trouble X X
Loop Restore X *
Ambush X X
Opening and Closing X * *
Bypass and Reset X
Add and Delete Codes X
Schedule Changes X
Supervisory Messages X X
* Restorals of fire and supervisory type zones are the only zone restorals displayed on the CRT
for acknowledgment.
* * The Opening and Closing reports are displayed on the CRT for acknowledgment if this feature has been
programmed as YES in the Command Processor panel.