User`s guide

40
2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282
SCS-1 Install/User's Guide
5 - PRINTOUT EXPLANATIONS
5.17 Supervisory Messages
All supervisory reports follow the same format. The account number, the report, and the time of occurrence.
An example is shown on the sample printout. The various supervisory reports are listed below:
WARNING: A.C. power failure
A.C. power restored
WARNING: Low standby battery
Standby battery restored
WARNING: Auxiliary fuse trouble
Auxiliary fuse restored
WARNING: Bell fuse trouble
Bell fuse restored
WARNING: Panel ground fault
Panel ground restored
WARNING: Bell circuit trouble
Bell circuit restored
WARNING: Panel tamper
Panel tamper restored
WARNING: Low communication line level
Communication line level restored
WARNING: Panel backup communication fail
Backup communication line restored
WARNING: New panel on line
WARNING: Non-alarm message overflow
WARNING: Fire-Burglary trouble overflow
WARNING: Communication trouble - Line X
ALARM: Panel not responding
Panel response restored
ALARM: Loop alarm overflow
ALARM: Fire zone alarm overflow
ALARM: Panic zone alarm overflow
ALARM: Burglary zone alarm overflow
TROUBLE: Message not acknowledged
TROUBLE: Carrier locked on line
Carrier off, Multiplex line restored
System not armed by scheduled time
Automatic recall test OK
Panel test signal received
ABORT signal received
Loop swinger automatically bypassed
Loop swinger automatically reset
System test begin
System test end
UNDEFINED MESSAGE: 0000000000000000000000