User`s guide

39
2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282
SCS-1 Install/User's Guide
5 - PRINTOUT EXPLANATIONS
5.11 Ambush
The Ambush report is logged on both printers and displayed on the CRT for acknowledgment.
An example of an Ambush report is shown on line 14 of the sample printout.
5.12 Opening and Closing Reports
Openings and Closings list the areas being armed or disarmed and the user number making the change. These
reports can be from 1 to 8 consecutive lines and are logged on the ACTIVITY LOG only.
An example of this report is shown on lines 15 to 17 of the sample printout.
5.13 Bypass and Reset
This report is printed in a one line format listing the zone number, zone name, and user number making the
change. The report is logged on the ACTIVITY LOG only.
An example of this message is shown on line 18 of the sample printout.
5.14 Add and Delete Codes
This report lists the user number added or deleted along with the user number of the individual making the
change. The report is logged on the ACTIVITY LOG only.
An example is shown on line 19 of the sample printout.
5.15 Schedule Changes
This is printed in a 2-line format listing the type of schedule (permanent or temporary), day of the week, opening
and closing time, and the user number making the change. This report is printed on the ACTIVITY LOG only.
An example is shown on lines 20 and 21 of the sample printout.
5.16 Door Access
This report lists the user number accessing the door strike relay and the door which is being accessed. The door
number matches the keypad address being operated by the user.
An example is shown on line 22 of the sample printout.