User`s guide

2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282

SCS-1 Install/User's Guide

4 - OPERATOR'S GUIDE

SYSTEM NUMBER: OPERATOR: CODE: LEVEL:

OPERATOR CODE LEVEL

OPERATOR CODES - OPC

REMEMBER: -Use the Down Cursor to go back one field.

-Use Esc to exit the current program.

-Use Del to delete entire lines.

-Use Return to enter a field and step to the next field.

-The next field does not appear until the previous field is entered.

FIELD NAME OPERATOR RESPONSE

SYSTEM NUMBER: The correct system number is displayed for reference

only and cannot be changed from this program.

OPERATOR: Enter the operator name or initials, maximum of 4 alphanumeric

characters. If the name does not exist, it is added to the list.

If it does exist it is highlighted and the corresponding code or

level can be changed. Press Del to delete the operator

name and corresponding code and level.

CODE: Enter the operator code, maximum of 8 alphanumeric characters.

LEVEL: Enter the operator level 1 to 4, 5 to 7, 8, or 9. After this entry, the

cursor returns for the next operator name. Press Esc for return

to the system menu.

NOTE: If an operator name is entered

without a code or level, the system

automatically enters a code of ******** and a level of 1.