User`s guide

22
2841 E. Industrial Drive Springfield, MO 65802-6310 800-641-4282
SCS-1 Install/User's Guide
4 - OPERATOR'S GUIDE
ENTER SELECTION:
OFF OPERATOR SIGNOFF
TDD SET SYSTEM TIME/DAY/DATE
NET NETWORK DEFINITIONS
OPC OPERATOR CODES
CON CONFIGURE SYSTEM
RED REDISPLAY NON-RESTORED STATUS
4.8 NET - Network Definitions
This selection allows you to assign Multiplex command processor numbers to the SCS-1. Telephone lines to
which Multiplex account numbers are assigned must have the correct type specification in the Configure System
program.
A Multiplex communication system polls up to 128 accounts on each telephone line. Assigning each account
number in service to a line on the SCS-1 ensures only valid accounts are polled. This speeds up communication
cycles.
Since digital dialers initiate the communication to the receiver and are not polled, it is not necessary to assign
digital dialer account numbers to a line. Telephone lines specified as DD will not accept account number
assignments.
The entire line specification is logged on the ACTIVITY LOG printer when any item in the configuration is
changed.